“The Split System Heat Pump (EF)
Coleman has combined the latest concepts in modern technology with time-proven quality standards to design a split-system heat pump to meet the demands of the energy-and quality-conscious commercial market. Both the outdoor and indoor units are completely piped and wired at the factory. Only the interconnecting liquid and vapor lines are required to complete the refrigerant circuit. Every unit is dehydrated, evacuated, leak tested and pressure tested before being pressurized with a holding charge of refrigerant-22 for shipment and/or storage. The compressor, the fan motors and the controls are functionally tested after the units are fabricated to assure a reliable start-up and years of dependable operation.
These units have been tested by Underwriters’ Laboratories and will be shipped with UL and CUL labels.
Special Benefits:
● Built for efficient operation, long life, and moderate installation costs.
● Completely assembled, piped, and wired at the factory ot provide one-piece shipment and rigging. Each unit is pressurized with a hold charge of R-22 for starage and/or shipping.
● Demand defrost system saves energy, reduces wear.
● All sheet metal parts are constructed of commercial grade (G90) galvanized steel, powder-paint coated to withstand a 750-hour salt-spray test.
● Full-perimeter base rails are permanently attached to provide a solid unit foundation and fork lift access.
● Compressor is internally protected against high pressure and temperature.
● Grooved copper tubes and enhanced aluminum fin coil construction improve heat transfer.
● Permanently lubricated condenser and evaporator fan motor bearings need no annual maintenance.
Available models for Outfitter™ Series EF 90 to 120 MBH R-22 Split Sytem Heat Pumps: EF-07 and EF-10.”