Product Details

The Reznor® V3 Series Model UDBS
Reznor® V3 Series Model UDBS gas-fired separated combustion unit heaters are available in 14 sizes ranging from 30,000 to 400,000 BTUH gas input. Model UDBS heaters are designed for 82-83% thermal efficiency and are approved for commercial/industrial installations in the United States and Canada by the Canadian Standards Association (CSA).

Reznor V3 Series unit heaters have a refreshing new appearance with a glossy white cabinet finish and less visible hardware. Each size cabinet is easily suspended from four suspension points. The low voltage terminal strip on the outside of the cabinet makes connecting control wiring easy with no panels to remove. The addition of a “G” terminal to the low voltage strip, along with the new design of the circuit board, allows for blower only operation (without adding relays). All units have a factory installed gas line nipple to the exterior of the cabinet for easy gas service connection.

The preeminent new internal feature is the Tcore2 heat exchanger and single burner combustion system. Other standard features include a single-stage gas valve, multi-try direct spark ignition with timed lockout, pressure switch to verify vent flow, resiliently isolated venter motor, venter wheel with improved housing, a high temperature limit control, interlock door switch, and a built-in disconnect switch. Sizes 30-125 are equipped with a centrifugal blower and direct drive motor with multispeed taps. Sizes 30 and 45 are capable of handling up to .5” w.c. of external static pressure; Sizes 60-125 will handle up to .75” w.c. of external static pressure. Sizes 150-400 are equipped with a centrifugal blower with an adjustable belt drive and motor. All units are designed for use with optional 30° and 60° downturn nozzles with horizontal and vertical louvers. Operation is controlled
through an integrated circuit board. The circuit board monitors heater operation and has LED diagnostic indicator lights to identify abnormalities in control functions.

The 1ST ever separated combustion system in the commercial/industrial heating industry was introduced on a Reznor heater in the 1960s, and that proven technology is continued in this new separated combustion product. Model UDBS separated combustion units require installation of a specially designed combustion air/vent system including the unique concentric adapter box that allows for only one building penetration for both the vent and combustion air.
The V3 Series unit heaters are designed to provide all the features you expect in a Reznor heater plus improved efficiency, easier installation, and a new look ~ both inside and out. Look for the unique white unit with no visible front and bottom hardware, deep red louvers, black side handle, and angled corner to know you have a genuine Reznor unit by Thomas & Betts.

STANDARD FEATURES:
● Certified for commercial/industrial heating applications
● 82-83% Thermal efficient ~ TOP in its class!
● 45-75°F Rise range – Sizes 30-350 50-80°F Rise range – Size 400
● Tcore² titanium stabilized aluminized steel heat exchanger
● Patented* single burner combustion system including a one-piece burner assembly
● 115/1/60 Supply voltage
● 115 Volt open dripproof blower motor with internal overload protection – Sizes 30-125
● 115 Volt open dripproof blower motor with internal overloads and definite purpose motor contactor – Sizes 150-400
● Direct drive blower with multispeed taps – Sizes 30-125
● Adjustable belt drive blower – Sizes 150-400
● Transformer for 24-volt controls
● Integrated circuit board with diagnostic indicator lights
● Blower relay (included on the circuit board)
● Multi-try direct spark ignition with timed lockout
● Single-stage natural gas valve (field adjustable for operation to 9,000 ft. elevation)
● Vibration/noise isolated venter motors
● Sealed compartment houses all electrical components
● 4-pt Suspension
● Built-in disconnect switch – Sizes 30-125, 20A@115V rating; Sizes 150-400 30A@115V rating
● External terminal strip for 24-volt wiring
● Sealed junction box for supply wiring
● External gas connection
● Fully gasketed door panel with safety door switch
● Improved cabinet design with less visible hardware

Note:
* U.S. Patent No. 6,889,686

OPTIONAL FEATURES – FACTORY INSTALLED:
● Equipped for propane gas
● Single-stage, propane gas valve (field adjustable for operation to 9,000 ft. elevation²)
● Two-stage natural gas or propane gas valve – Sizes 60-400
● 409 or 316 Stainless steel heat exchanger
● 208, 230, 480, and 575 Three phase voltage – Sizes 150-400 (step down transformer shipped separate for field installation for 480 and 575 units)
● Adjustable belt drive and motor for up to .5” w.c. external static pressure – Sizes 150-400
● Totally enclosed blower motor – Sizes 150-250
● Belt and blower guards

OPTIONAL FEATURES – FIELD INSTALLED:
● Horizontal or Vertical Combustion Air/Vent Kit including concentric adapter³
● Thermostat
● Thermostat guard with locking cover
● Vertical louvers
● Downturn nozzle (30° or 60° deflection, with and without vertical louvers)
● Gas conversion kits
● Manual shutoff valves
● High altitude kits (above 6,000 ft. to 9,000 ft.)
● Primary/secondary controls for zoning up to six units
● Duct flange
● Polytube adapters
● Blower and belt guards
● Hanger kits for 1” pipe
● Stepdown transformer (for 208/115, 230/115 or 460/115 supply voltage) – Sizes 30-125

Note:
² Pressure switch change required for installations above 6,000 ft.
³ Selection of either a horizontal or vertical combustion air/vent kit is required.

For installations where dirt, dust, and other air borne contamination is present in the indoor environment, it is recommended to use separated combustion units (Model UDBS). These models use air from outside the space for combustion. This will help reduce the build up of contaminates on the burner which would affect the combustion process. Refer to the installation manuals for recommended frequency of maintenance and cleaning.