The Reznor’s Model RDC Cooling and Dehumidifying Makeup Air Packaged Systems
The MAPS®IV Series packaged rooftop units are designed to cool, dehumidify, and heat high volumes of out side air year round for makeup air and ventilation applications. In addition, MAPSIV can provide significant capacities of space conditioning. Model RDC units offer all these same features, but also include Reznor Re-Heat Pump™ dedicated reheat cycle. Re-heating of the air by this method saves over 4 to 5 times the energy used by electric heating elements. Additionally, the system is capable of maintaining reheat even when the demand for cooling and dehumidification is minimal. More importantly, this method of reheat complies with ASHRAE
Standard 90.1. All MAPSIV products feature the Reznor IQ digital controller to fully integrate all operation and external sensing into a stand-alone package or through native BacNet, into a building management system.
Unit Features:
Supply Fan
● 1,000 – 9,000 CFM
● Plenum or Forward Curve Blowers
● Belt Driven, Adjustable Sheave System
● Horizontal or Vertical Discharge
● Optional Unit or Field Mounted VFD
» Duct Static Pressure Control
» CO2 Control
» Building Static Pressure Control
● Vibration Isolated Fan and Motor System
● Fan and Motor Lube Lines for Servicing
● Power Exhaust (A, B, & C Cabinet only)
Mechanical Cooling:
● R410A Refrigerant (Environmentally Friendly)
● High Outside Air Applications
● 20% – 100% Capacity Control
● Modulated Capacity Scroll Compressor with internal motor overload
● Compressor Anti-Cycle Programming
● Mechanical Gauge Connection
● Fully Interlaced Coils
Dedicated Reheat Pump:
● Independent Reheat System
» Verifiable & Predictable Performance
» Low ambient operation (58°F)
» Lower energy cost
● Optional Modulating control for tighter performance
● R410A Refrigerant
Construction:
● Double Wall Construction Standard – R9 or higher value
● Hinged Access Doors with Handles
● Easy Access Compressor Section
● Unit or Field Mounted Disconnects
● 2” or 4” Permanent or Pleated Filters (MERV8 or MERV13 available)
● Optional Hail Guard
● Slide Out and Sloped Stainless Steel Condensate Drain Pan
● 4 – 6 Point Base Lifting Connections
● Insulated, 16 Gauge, Downturn or Horizontal air Flow, Full Perimeter Curb
● G90 Galvanized Steel Substrate, 60 Gloss Finish
● Hold Door Open Service Hinges
Intake:
● 100% Outside Air Option
● 100% Outside & Return Air Option
» Economizer control
» CO2 Control
» Building Static Pressure Control
» Manual Positioning External 0-10V Signal
● Optional Outside Air Hood with Washable 1” Filter
● Integral Energy Recovery
» Variable Flow Control
» Frost Control
» Single Curb
» Isolation Dampers
Controls:
● 208/3, 230/3, 460/3, 575/3
● Field Selectable Unit Configuration and Unit Mounted Display
● Optional Remote User Display
● Easy System Integration
» BacNet or Lon
● Optional Phase Loss, Smoke Detector, Filter Status
● Isolated High voltage Compartment
● Controller Output LED Status
● Test Mode
● Optional Weatherproof Convenience Power Outlet
Warranty:
● Standard One (1) Year Part Warranty
● Optional Five (5) Year Compressor Warranty